Waveshare (2)


Top 9 LoRa Gateway – Netzwerk-Switches

Als Amazon-Partner verdiene ich an qualifizierten Verkäufen.

1. Aihasd

Aihasd 868MHZ LG01-P Open Source LoRa Gateway

Aihasd - Document link:https://www. Adrive. Com/public/uwpp27/f000811%20English%20document. Docx. The lg01-p is an open source single channel lora gateway.

It lets you bridge lora wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. Lg01-p has wifi interface, ethernet port and USB host port. Lg01-p runs open source openwrt system, user are free to modify the source file or compile the system to support their customized applications. These interfaces provide flexible methods for users to connect their sensor networks to Internet. The lora wireless allows users to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity.
MarkeAihasd
HerstellerAX Electronic
Artikelnummer531619134153-8
Modell531619134153-8

2. MakerHawk

MakerHawk Mini Lora Gateway LoraWan SX1301 Chip 868 MHz Unterstützung USB SPI Kommunikation, messen Abstand 17KM mit 868 MHz Antenne für Raspberry Pi Zero/Zero

MakerHawk - Allgemeine szene-einfach in großer szene zu arbeiten; einzigartiges thermisches design - Die große Wärme, die vom HT-M01 LoRa Gateway erzeugt wird, kann durch spezielle Wärmeübertrager an die Aluminiumschale geleitet werden, was die Wärmeableitungsfunktion verstärkt und die Stabilität bestätigt.

Mini lora gateway: der core-chip des lora-gateways ht-m01 ist der sx1301-basisband-chip. Ultra-kleine größe und hübsches design-die schale ist aus aluminiumlegierung Material CNC-Präzisionsbearbeitung und es ist mit Sandstrahlen Oxidation, für Raspberry Pi Zero Oberfläche behandelt, kann für Raspberry Pi durch dedizierte Adapterplatine integriert werden. Es zielt hauptsächlich auf drahtlose sensornetzwerke, das Internet der Dinge, eingebettete Anwendungen, die Entwicklung von LoRaWAN Networking mit unserem Produkt schnell abzuschließen. Mini lora gateway: kann mit 1000 + lora-knoten verbinden, die erektionshöhe beträgt mehr als 60 m und die effektive Sende- und Empfangsdistanz der gemessenen Open-Area-Daten beträgt 17 km; Support läuft auf Windows.

Er ist ein industrielles standard-lora / LoRaWAN-Gateway-Modul, es kann Kunden helfen, das hohe Leistung und geringe Größe bietet. Diverse adaption- unterstützung von USB, SPI-Kommunikation; Einfach zu installieren - Es kann nach der Installation verwendet werden. Anleitung: https://drive. Google. Com/file/d/17fbk6orhuuwrphhk6m6q8uhtz97ckrm5/view?usp=sharing.
MarkeMakerHawk
HerstellerMakerHawk
Höhe1.5 cm (0.59 Zoll)
Länge6.6 cm (2.6 Zoll)
Breite3 cm (1.18 Zoll)
ArtikelnummerG269S81917BPESCXVIVQJMB5

3. Aihasd

Aihasd LG02 Dual Channels LoRa IoT Gateway Indoor,Long Distance Wireless LoRaWAN Repeater 868Mhz

Aihasd - The lg02 is only of its 1/4 or less cost. The lora wireless allows users to send data and reach extremely long ranges at low data-rates. Lg02 is an open source dual channels lora gateway. These interfaces provide flexible methods for users to connect their sensor networks to Internet. It provides ultra-long range spread spectrum communication and high interference immunity.

Lg02 has rich internet connection method such as WiFi interface, Ethernet port and USB host port. Click this link for more info about the modes. This make the lg02 very suitable to set up small scale LoRa network or use it to extend the coverage of current LoRaWAN network. Compare to the cost with normal SX1301 LoRaWAN solution. Lg02 can be used to provide a low cost iot wireless solution to support 50~300 sensor nodes. Except lorawan mode, mqtt mode, tcp/ip client mode, lg02 can support mutiply working mode  such as: LoRa repeater mode, TCP/IP Server mode to fit different requirement for IoT connection.

Lg02 base on sx1276 solution which provide a low cost for your iot network connection. It lets you bridge lora wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. The design of lg02 is use the linux to directly control two sx1276/sx1278 LoRa modules which lets the LoRa can works in full duplex LoRa mode and increase the communication efficiency. Lg02 can support the lorawan protocol in single frequency and customized lora transmit protocol.
MarkeAihasd
HerstellerAihasd
Artikelnummer1547

4. MakerHawk

MakerHawk ESP32 LoRa Modul SX1276 868 915 MHz Wifi Modul IoT Karte Dual Core 240 MHz CP2102 Geringer Stromverbrauch mit 0,96 Zoll OLED Display und Antenne für Arduino

MakerHawk - Eine dient zum senden von Nachrichten und die andere zum Empfangen von Nachrichten. Es ist nicht zusammengebaut und muss manuell zusammengebaut werden. Gutes schaltungsdesign und design mit geringem stromverbrauch - ruhestrom ≤800ua, empfängerempfindlichkeit bis - 139 dBm, +20 dBm Ausgangsleistung.

Hohe zuverlässigkeit: mit unserem lora-test-tool beträgt die gemessene offene Kommunikationsentfernung 2, 8 km. Verbessertes sx1276 lora 868 / 915mhz-entwicklungsboard mit antenne: upgrade auf 8mb 64m-bit flash; fügen Sie einen Vext-Ausgangs-Pin hinzu. Benutzer können diesen Pin verwenden, Motor usw. 3. Benutzerhandbuch und vorsichtsmaßnahmen: https://drive.

Google. Com/open?id=1jqsra08mqb5oipchekL956QsiGw8Zcb5; 2. Enthält die batterie nicht, können Sie diese unter https://www. Amazon. De/dp/b07cymymS9 erwerben. Wenn sie die lora-funktion verwenden möchten, benötigen Sie zwei esp32-Lora-Module. Anzusteuern. Der abstand der stifte beträgt 2, udp-durchsatz: 135 Mbit / s, 54 * 23 mm und passt auf das Steckbrett.
MarkeMakerHawk
HerstellerMakerHawk
Höhe0.13 cm (0.05 Zoll)
Länge5.2 cm (2.05 Zoll)
Gewicht0 kg (0.01 Pfund)
Breite2.54 cm (1 Zoll)
Artikelnummer79354UGI0YBWR4118G5PKT0OM

5. RAKWireless

RAK7243 4G LoRa Gateway,support 868MHz

RAKWireless - Sx1301 base band processor, emulates 49 x LoRa demodulators 10 programmable parallel demodulation paths, support 8 uplinks channel, 1 downlink channel. Built-in the ublox MAX-7Q GPS Module. Built-in heat Sink for thermal heat dissipation management. Computing with Raspberry Pi 3B+Linux. Support optional cellular modulequectel bg96 or eg91 or eg95 for NB-IOT / CAT-M / CAT1 LTE / CAT4 LTE.
MarkeRAKWireless
HerstellerRAKWireless
ArtikelnummerRAK7243-4G

6. Aihasd

Aihasd LG308 Innen LoRaWAN Pico Gateway 8-Kanal 868 MHz

Aihasd - Sx1276 base seperate TX path. Emulates 49x LoRa demodulators. Managed by web gui, ssh via LAN or WiFi. Open source OpenWrt system. 868mhz lorawan Gateway.
MarkeAihasd
HerstellerAihasd
Artikelnummer1630

7. MakerHawk

20dBm 100mW Gemessener Abstand 3000M UART SX1278 / SX1276 RF Empfänger Sender, MakerHawk RF Wireless Übertragungsmodul 868 MHz LoRa Spread-Spektrum-Kommunikation, Super Anti-Interferenz-Leistung

MakerHawk - Das drahtlose transceiver-Modul unterstützt verschiedene Schlaf- und Stand-by-Modi. Niedriger stromverbrauch und fec forward error correction: arbeiten im radio, wodurch die Kommunikationsdistanz weiter gemacht wird, anwendbar für batteriebetriebene Anwendungen. Energieverbrauch und Leistung sind stark verbessert.

Unter verwendung des fec-vorwärtsfehlerkorrekturalgorithmus kann er aktiv die interferierten Datenpakete korrigieren, die Anti-Interferenzfähigkeit stärker wird und die Luftweckfunktion erhalten wird. Impedance control: reduziert die Transmissionsreflexion von Hochfrequenzsignalen und verbessert die Effektivität der Signalübertragung. Hohe qualität garantie und verschiedene angewandte anlässe: das 868 mhz lora wireless-Übertragungsmodul hat CE-Zertifikat, Temperatursensor, intelligente Landwirtschaft, industrielle drahtlose Steuerung, intelligentes Ölfeld, FFC-Zertifikat und ROHS-Zertifikat erworben. Es kann in ablesung, Umweltmonitor und intelligentes Haus angewendet werden.

Bertragungsmodi: die benutzer können die nichtbenutzung und das herunterfahren des moduls frei steuern. Lora spread-spektrum-kommunikation super anti-interferenz-leistung: das RF Wireless-Übertragungsmodul nutzt die LoRa-Spread-Spectrum-Technologie, was bedeutet, dass die Übertragungsdistanz und die Durchdringungskapazität um ein Vielfaches höher sind als bei herkömmlichen Frequenzumtastungen. Es gibt vier Übertragungsmodi: transparente Übertragung Point to Point, transparente Übertragung Broadcasting, Broadcast-Übertragung und feste Übertragung.
MarkeMakerHawk
HerstellerMakerHawk
Höhe1 cm (0.39 Zoll)
Länge3.6 cm (1.42 Zoll)
Gewicht0.01 kg (0.02 Pfund)
Breite2.1 cm (0.83 Zoll)
Artikelnummer1DRLZ4QZ13V50K58R7PGZ4DZ

8. GeeekPi

GeeekPi Lora Raspberry Pi Hat,Docker Pi IoT NodeA w/GPS,BDS,2G,LORA Programmierbares Docker Pi Modul,Lora Hat Board für Raspberry Pi

GeeekPi - Unterstützt raspberry Pi und ähnliche Produkte. Der iot-knoten a ist eines der Module der Docker Pi-Serie. I2c steuert lora direkt, sendet und empfängt daten, steuert das gSM / GPS / BDS-Modul über SC16IS752, das Mainboard benötigt nur I2C-Unterstützung. Wiki: https://wiki. 52pi. Com/index. Php/iot_node a _sku: _eP-0105. Iot-knoten a = gps / bds + gsm + Lora.
MarkeGeeekPi
HerstellerGeeekPi
ArtikelnummerEP-0105

9. Waveshare

Waveshare SX1262 LoRa HAT for Raspberry Pi Spread Spectrum Modulation 868MHz Frequency Band Auto Multi-Level Repeating Supports Wireless Parameter Configuration and Fixed-Point Transmission

Waveshare - Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications. Brings the uart control interface, easy to check the module status.

Lora spread spectrum modulation technology, up to 81 available signal channel, for connecting host boards like Arduino/STM32. Supports fixed-point transmission, tuning the network. Comparing with normal lora modules, the SX1262 LoRa HAT achieves longer communication distance, data collection, higher rate, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, lower consumption, etc. By utilizing the new generation lora spread spectrum modulation technology, wireless config, carrier sensing, also supports auto repeating to transmit longer.

Onboard cp2102 usb to uart converter, longer communication distance, for serial debugging. Supports wireless parameter configuration, by sending wireless command/data packet, greatly improves the success ratio under extreme environment. 4x led indicators, more robust to interference. Supports lbt, remotely configure or retrieve the module parameter. Other features include wake on Radio, the communication distance of the module is as long as 5km, communication key, and so on.
MarkeWaveshare
HerstellerWaveshare
ArtikelnummerSX1262 868M LoRa HAT



Top 10 Epaper Display – Barebones

Als Amazon-Partner verdiene ich an qualifizierten Verkäufen.

1. Waveshare

Waveshare 7.5 Inch E-Paper Display HAT Module Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi 2B 3B Zero Zero W

Waveshare - Due to the advantages like ultra low power consumption, with embedded controller, it is an ideal choice for applications such as shelf label, clear display without electricity, 800×480 resolution, wide viewing angle, and so on.

No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Spi interface, etc. Revision v2 has been released on 2019. 11, from 640×384 of v1. The hardware and interface of v2 are compatible with V1, the resolution is upgraded to 800×480, however, the related software should be updated. Onboard voltage translator, compatible with 3.

3v/5v mcus. Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/Arduino/STM32. Standard raspberry pi 40pin gpio extension header, supports Raspberry Pi series boards, for connecting with other controller boards like Raspberry/Arduino/Nucleo, Jetson Nano. This is an e-ink display hat for raspberry pi, 7. 5inch, industrial instrument, communicating via SPI interface.
MarkeWaveshare
HerstellerWaveshare
Höhe8.99 cm (3.54 Zoll)
Länge18.01 cm (7.09 Zoll)
Gewicht0.04 kg (0.09 Pfund)
Breite10.01 cm (3.94 Zoll)
Artikelnummer7.5inch e-Paper HAT
Modell7.5inch e-Paper HAT

2. Waveshare

Waveshare 2.7 Inch E-Paper Display HAT Module Kit 264x176 Resolution 3.3v E-ink Electronic Paper Screen with Embedded Controller for Raspberry Pi 2B 3B Zero Zero W SPI Interface

Waveshare - Compatible with raspberry pi 2b/3b/3b+/zero/Zero W. Comes with development resources and manual examples for Raspberry Pi/Arduino/STM32. Ultra low power consumption, basically power is only required for refreshing.

Onboard voltage translator, compatible with 3. 3v/5v mcus. Due to the advantages like ultra low power consumption, wide viewing angle, industrial instrument, great effect under sunlight, it is an ideal choice for applications such as shelf label, and so on. No backlight, keeps displaying last content for a long time even when power down. Onboard 4x Keys. This is an e-ink display hat for raspberry pi, 2. 7inch, 264x176 resolution, with embedded controller, communicating via SPI interface.
MarkeWaveshare
HerstellerWaveshare
Höhe8.99 cm (3.54 Zoll)
Länge18.01 cm (7.09 Zoll)
Gewicht0.01 kg (0.02 Pfund)
Breite10.01 cm (3.94 Zoll)
Artikelnummer2.7inch e-Paper HAT
Modell2.7inch e-Paper HAT

3. Waveshare

Waveshare 2.13 Inch e-Paper Display HAT 250x122 Resolution E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B Zero Zero W,SPI Interface

Waveshare - Onboard voltage translator, for connecting with other controller boards like Arduino/Nucleo, compatible with 3. 3v/5v mcus. Compatible with raspberry pi zero/Zero W/Zero WH/2B/3B/3B+, Jetson Nano. Comes with development resources and manual examples for Raspberry/Jetson Nano/Arduino/STM32. Ultra low power consumption, basically power is only required for refreshing. No backlight, keeps displaying last content for a long time even when power down. Preserved solder pads for spi interface, etc.
MarkeWaveshare
HerstellerWaveshare
Artikelnummer2.13inch e-Ink HAT

4. Waveshare

Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296*128 Resolution E-ink Electronic Screen for Raspberry Partial Refresh SPI interface

Waveshare - No backlight, keeps displaying last content for a long time even when power down. Spi interface, etc. Onboard voltage translator, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, compatible with 3.

3v/5v mcus. Due to the advantages like ultra low power consumption, great effect under sunlight, wide viewing angle, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. This is an e-ink display module, communicating via spi interface, with embedded controller, 296x128 resolution, 2.9inch, supports partial refresh. Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/Arduino/STM32. Ultra low power consumption, basically power is only required for refreshing.
MarkeWaveshare
HerstellerWaveshare
Höhe8.99 cm (3.54 Zoll)
Länge18.01 cm (7.09 Zoll)
Gewicht0.01 kg (0.02 Pfund)
Breite10.01 cm (3.94 Zoll)
Artikelnummer2.9inch e-Paper Module
Modell2.9inch e-Paper Module

5. Waveshare

296x128 Resolution 2.9 Inch E-Paper Display Panel Module 3.3v E-Ink Electronic Screen SPI Interface with Embedded Controller Support Partial Refresh for Raspberry Pi/Arduino/Nucleo/Jetson Nano

Waveshare - Spi interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Ultra low power consumption, basically power is only required for refreshing. Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/Arduino/STM32, download resources: www. Waveshare. Com/wiki/2. 9inch_e-Paper_Module. Onboard voltage translator, compatible with 3. 3v/5v mcus. No backlight, keeps displaying last content for a long time even when power down.
MarkeWaveshare
HerstellerWaveshare
Höhe0.2 cm (0.08 Zoll)
Länge3.51 cm (1.38 Zoll)
Gewicht0.02 kg (0.04 Pfund)
Breite2.01 cm (0.79 Zoll)
Artikelnummer2.9inch e-Paper Module
Modell2.13inch E-Ink HAT 250x122

6. Waveshare

Waveshare 1.54Inch E-Paper Display PanelB Module Kit 200x200 Resolution 3.3v E-Ink Electronic Screen with Embedded Controller,Red Black White Three-Color for Raspberry Pi/Nucleo,SPI Interface

Waveshare - Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/STM32. This is an e-ink display module, communicating via SPI interface, supports red, black, 1.

54inch, with embedded controller, 200x200 resolution, and white three-color display. No backlight, keeps displaying last content for a long time even when power down. Due to the advantages like ultra low power consumption, industrial instrument, great effect under sunlight, wide viewing angle, it is an ideal choice for applications such as shelf label, and so on. Ultra low power consumption, basically power is only required for refreshing.
MarkeWaveshare
HerstellerWaveshare
Gewicht0.02 kg (0.04 Pfund)
Artikelnummer1.54inch e-Paper Module (B)
Modell1.54inch e-Paper Module (B)

7. Waveshare

Waveshare 4.2 Inch E-Paper Display Panel Module Kit 400*300 Resolution 3.3v E-ink Electronic Paper Screen for Raspberry Pi Partial Refresh SPI Interface with Embedded Controller

Waveshare - Comes with development resources and manual examples for Raspberry Pi/Arduino/STM32. Onboard voltage translator, compatible with 3.

3v/5v mcus. No backlight, keeps displaying last content for a long time even when power down. Due to the advantages like ultra low power consumption, it is an ideal choice for applications such as shelf label, wide viewing angle, great effect under sunlight, industrial instrument, and so on. This is an e-ink display module, 400x300 resolution, with embedded controller, 4.2inch, communicating via SPI interface. Ultra low power consumption, basically power is only required for refreshing.
MarkeWaveshare
HerstellerWaveshare
Höhe8.99 cm (3.54 Zoll)
Länge18.01 cm (7.09 Zoll)
Gewicht0.01 kg (0.02 Pfund)
Breite10.01 cm (3.94 Zoll)
Artikelnummer4.2inch e-Paper Module
Modell4.2inch e-Paper Module

8. Waveshare

Waveshare 1.54 Inch E-Paper Display Panel Module Kit 200*200 Resolution3.3v E-ink Electronic Screen for Raspberry Pi with SPI Interface Embedded Controller

Waveshare - Ultra low power consumption, basically power is only required for refreshing. This is an e-ink display module, with embedded controller, communicating via SPI interface, 200x200 resolution, 1.

54inch, supports partial refresh. Spi interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/Nucleo, etc. No backlight, keeps displaying last content for a long time even when power down. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
MarkeWaveshare
HerstellerWaveshare
Höhe5 cm (1.97 Zoll)
Länge10.01 cm (3.94 Zoll)
Gewicht0.01 kg (0.02 Pfund)
Breite8 cm (3.15 Zoll)
Artikelnummer1.54inch e-Paper Module
Modell1.54inch e-Paper Module

9. Waveshare

Waveshare Universal e-Paper Driver Board with WiFi SOC ESP8266 Onboard Supports Various Waveshare SPI e-Paper Raw Panels

Waveshare - Furthermore, it can also be used for Android development, just like any other normal Android board. Supports floyd-steinberg dithering algorithm, more color combinations, better shadow rendering for the original image. This is a universal driver board for e-Paper raw panels, thanks to the WiFi connectivity, it is allowed to display image from PC/smart phone via WiFi conveniently. Supports popular image formats: bmp, JPEG, GIF, PNG, etc. Easy to be integrated into wireless applications. Onboard esp8266, supports Arduino development;Comes with e-Paper driver open source.
MarkeWaveshare
HerstellerWaveshare
Höhe9 cm (3.54 Zoll)
Länge18 cm (7.09 Zoll)
Gewicht0.01 kg (0.02 Pfund)
Breite10 cm (3.94 Zoll)
Artikelnummere-Paper ESP8266 Driver Board
Modelle-Paper ESP8266 Driver Board

10. Waveshare

Waveshare 2.13inch Flexible E-Ink Display HAT for Raspberry Pi Black/White Dual-Color 212x104 Resolution E-Paper SPI Interface Embedded Controller Partial Refresh.

Waveshare - Preserved solder pads for spi interface, for connecting with other controller boards like Arduino/Nucleo, etc. Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/Arduino/STM32. Compatible with raspberry pi 2b/3b/zero/zero W;Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.

This is a flexible e-ink display hat for raspberry pi, supports partial refresh. Compared with normal e-paper panels, with embedded controller, 212x104 resolution, this flexible panel allows bending without being damaged, 2.113inch, communicating via SPI interface, and it's thinner and lighter. Combined with the advantages like ultra low power consumption, clear display without electricity, it is an ideal choice for applications where curved surface display is required, such as industrial instruments, wide viewing angle, smart wearable-devices, and so on.

Flexible e-paper, the display section is bendable doN'T bend the FPC section;No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing.
MarkeWaveshare
HerstellerWaveshare
Höhe3 cm (1.18 Zoll)
Länge8 cm (3.15 Zoll)
Gewicht0.01 kg (0.02 Pfund)
Breite5 cm (1.97 Zoll)
Artikelnummer2.13inch e-Paper HAT (D)
Modell2.13inch e-Paper HAT (D)